Are you DIY technician like me, you will agree that at times tasks that ought to be simple can be daunting if they pile up. Even if you are a craftsman, you’re not left out either. Letting your work accumulate would be the worst blunder that can happen. In a bid to complete on time, you have to strain and even work for longer hours than you are used to.
But every task is all about efficiency and that is why you need an air compressor as your companion. But you need the right equipment particularly when you are doing it for a living. It will save you the time, stress and the soreness that results from doing all the functions manually striking, scrubbing and pressing. By employing an air compressor, you will not only make your work less strenuous but also achieve professional results.
- Product Name
24lbs, 9 inches high, 1-gallon storage tank, electric powered, 2.6 amp motor, oil-free pump, 69dBA, and heavy-duty iron construction
5.2 gallon tank, 3HP motor, cast iron material, oil-powered, low temp, pump finned tubing, folding handle
60 dBA, 1HP motor, long lasting oil-free pump, all temperatures, 46lbs tank, wheeled, rechargeable
60 decibels, 1HP motor, electric-powered, 6.3 gallon horizontal tank, wheeled,
6 gallon tank, 78.5 decibels, light, max pressure 150PSI
Pancake 6-gallon tank, high-flow regulators and 2 universal couplers, allows 2 users, 75.5dBA,
2.5HP 4-pole motor, cast iron pump, oil-powered, 79 decibels, twin storage tanks, roll handle for protection, finned tubing to dispel heat,
Compact (lightweight), 20lbs, silent, l-gallon tank, quick recovery, oil-free
Oil-powered, 2.0HP motor, large air filter, 2.6 gallon tank, roll handle for protection, tank drain valve, excess heating discharge tubing
Oil-free pump, pancake 6 gallon tank, rubber covered feet, water drain valve, powerful motor, coupler and plug already installed, pressure regulator for adjustability, 25’ nylon hose.
What To Look For When Choosing An Air Compressors
Maximum Required Operating Pressure: The pressure needed will tell whether you need a Single stage or Two-stage compressor. When more pressure is required, you need a 2-stage compressor.
Maximum Required CFM Usage: Cubic Feet Per Minute (CFM) rating is yet another key consideration. It refers to the amount of air the unit can produce at a particular PSI. A paint sprayer is a high volume tool that needs higher CFM ratings to sustain the long period usage. However, a brad nailer does not require much time and effort and as such would need lower CFM ratings. Besides, a unit with maximum CFM will support most of your tools even if it is the high CFM ones like grinders and sanders.
Pressure Gauges: Air pressure is measured in Pounds per inch (PSI). Consider an air compressor that has 2 pressure gauges. One of the pressure gauges shows the level of air in the tank while the other one indicates the amount of air displaced through the hose to the air tool. Found on the second pressure gauge is a regulator where you can tune the air pressure to match the PSI rating on the tool.
Horse Power: HorsePower is the unit of measurement of an air compressor’s power. The air compressors with high HP allow for more flexibility. Besides, it allows a high CFM/HP for the best performance.
Usage Environment: The method of powering a compressor highly determines the area of applications. When you go for an electric-powered compressor, there is one type that can hold a charge while the other type has to remain plug-in when in use. Oil compressors are designed for both indoor and outdoor usage. Large terrains would need rechargeable compressors as opposed to the oil-powered ones.
Storage Tank Size: If you need a compressor for quick and short tasks, a small tank will do. However, if you want to use your compressor for a long duration, for example, when sanding boards, you may need a large tank. A large tank allows the compressor to operate at a high maximum pressure.
Brand: Save yourself the trouble by purchasing an air compressor from a reputable company. Don’t compromise the quality over price by settling unknown companies. Since there are many brands on the market, selecting the perfect air compressor can be a daunting task. As a result, we assumed the responsibility and set out on a research aiming to compile detailed reviews of the best selling air compressors on the market in 2019. It is our belief that these comprehensive reviews of air compressors will give you a fantastic shopping experience.
Closing the list of the top best air compressors is the highly reliable and efficient air compressor, DELWALT D55140. Whether you are a woodworker or a finish carpenter, this unit is designed to make your work easier. If you handle a variety of tasks, then D55140 is the go-to air compressor. Its versatile nature allows you to attend to many jobs with the ultimate professionalism.
This compressor is a real definition of portability thanks to the lightweight and compact design. It weighs 24 lbs only and measures 9 inches in height. As a result of the petite weight, you can easily transport to whatever work station regardless of the distance.
Featuring is a one-gallon air storage tank capable of sustaining a maximum pressure of 135 PSI. Besides, it comes with a 2.6 HP and an easy to start motor able to deliver 0.75 CFM at 90 PSI improving performance and boosting recovery. The motor is strong enough to provide maximum air pressure for excellent results. Sixty-nine decibels is a relatively low operating sound to ensure that you have a quiet work setting. However, we appreciate the fact that not everybody has their own preferences. As such if you are the kind that would like a quieter choice, you may need to consider Senco PC1010.
Being electric-powered, D55140 features an oil-free pump which eliminates the need for maintenance. In return, you do not incur anything on maintenance on this electric powered compressor as happens with the oil-powered counterparts. The oil-free design of the pump will ensure that you have a non-messy job. What’s more, even if you are a DIY craftsman, you can use this compressor as it features with a universal one-hand connection. That makes it a great choice for those who have little experience working with tools.
To enhance the durability and long life, this compressor has a heavy-duty cast iron construction. Forget about those flimsy compressors that you use a few days and they are gone, which would be a waste of time and money. Besides, it comes with roll cage and frame for maximum protection against wear and damage even when working on tough job sites. Also, covered in the shield is the control panel that ensures the key compressor components are not susceptible to damage. As such, chances of the compressor sustaining simple damages are slim meaning it will offer you a long term service.
- Ultra-light weighing only 24lbs
- Sturdy and durable
- Has a powerful motor
- It doesn’t recharge, and requires plugging
Perform your tasks with professionalism with Makita MAC5200 air compressor, which boasts of cutting-edge technology. This compressor features an oil-powered 3.0 HP motor which delivers 6.5 CFM at 90PSI for increased productivity. The same way a car has an engine, a motor is the engine of every compressor. It has to be robust enough for the best performance. Mac5200 air compressor has its motor reinforced with an inbuilt thermal overload, to give it additional protection. That helps to boost the lifespan of the motor.
It comes with a specially engineered cast iron pump with a Big Bore cylinder and a piston to allow optimal compression and faster recovery. The ultimate result is lowered noise when working. The cast iron comes with an iron construction making it highly durable. As such, you can use it in harsh job environments without worrying about damages. What’s more, you will not experience trouble with maintenance as the cylinder is removable.
Moreover, featuring on MAC5200 is a pump that you need to lubricate with oil to ensure that it runs at low temperatures. Besides, the low temperature reduces the possibility of wear. With a large filter designed like that of an automotive, you are assured of maximal air intake and enhanced efficiency. The effectiveness of the oil pump is an advantage as it helps to keep the compressor running at a low temperature. To further reduce any the excess heat build-up, the pump has finned tubing that discharges the heat into the atmosphere.
MAC5200 has a 5.2-gallon storage tank capable of support a maximum operating pressure of 130 PSI. As a result, it produces 6.9 CFM at 40PSI and 6.5 CFM at 90PSI. The motor has a low amperage draw to reduce the possibility of tripped breakers. Besides, it helps to lower instantaneous voltage drop that would lead to the premature failure of the motor. The fact that voltage drop will be rare ensures there is no time the compressor will be down.
When it comes to safety, the manufacturer has put that into consideration. It has a folding handle that not only provides comfort when handling but also offers extra protection for the machine. What’s more, since you can fold the handle, you can be assured that storage will be easy. Another feature worth noting is a roll handle that plays a significant role. Normally, you will have a lot of tools with you when at work. This compressor comes to your aid in that you can hang them on the handle whenever you complete using them.
Have you ever been caught off-guard with an empty tank when on duty? You have no oil with you, and the fueling station is far from where you are working. That will no longer bother you as it has a sight glass where you can not only keep track of the oil level but also make the maintenance easy. Standard Petcock design is not longer fashionable. As a result, featuring is a drain value that resembles the standard automotive tank for easy maintenance.
As always, Makita releases any product only after thorough testing to ensure it has no flaws. There is no doubt MAC5200 has undergone extensive testing and will not disappoint. As such, the compressor comes backed by a 1-year warranty. What’s more, if you think it does not meet your expectations, you can get full refund or replacement after 30 days.
Bless yourself with this high performance, reliable and durable air compressor and do your work like an expert.
- It has a cast iron and oil-lubricated pump cylinder
- Motor has inbuilt thermal overload for a long life
- One year warranty
- Finned tubing for dissipation of excess heat
- Tank drain valve allows for ease of maintenance
- Just relatively silent
CAT 5510A is synonymous with quietness with only 60 decibels which make its among those with the lowest noise in the compressor industry. If yours is a no-noise environment, then this is your best bet. From now on, there is no more working in a noisy work setting. And if you are among those who enjoy a chat when working, you will be glad that you can speak comfortably over the machine without the need to raise your voice. Besides, you will no longer worry about working disturbing your neighbors with noise that they might consider a nuisance even when working indoors.
The unit has a powerful 1.0 HP motor reaching a peak of 2 HP. Also, the motor operates at 1680 RPM, which is low enough to make it less noisy and to even lower chances of wear. And since electricity powers the compressor, it requires little to no maintenance. That should eliminate any more worries that may have resulted from having trouble with oil-powered air compressors. Besides, the other best thing is that you may need to forget about incurring much maintaining this compressor.
Also, CAT 5510A has a high quality oil-free dual piston pump that has a lifespan of 3000hours. Pumps in other brands will rarely give you service for that long with most of them having a lifecycle of 500 hours only or even less. That feature translates to high performance and ultimately, durability. Besides, if you have faced challenges using an oil-pump at certain temperatures, then you are sorted. You can have the peace of mind doing your thing at any temperature and in any terrains.
This compressor comes with an Aluminum 5.5-gallon horizontal air storage tank which provides sufficient air storage capacity. Moreover, it supports a maximum pressure of 120PSI. The tank’s Aluminum construction makes it durable enough for a harsh work setting. Besides, the interior of the tank is rust-resistant which gives it a longer lifespan. It is necessary to bear in mind that it does not come with a water separator like that of CAT 6310 to aid in dispensing excessive water from the compressed air. A solution is to drain the water manually.
If there is an air compressor that is lightweight, then CAT 5510A is one of them weighing 46lbs only. The feature allows you to carry it to different work locations. CAT 5510A delivers 3.10 CFM at 40PSI and 2.20 CFM at 90PSI.
Also, below the tank are 2 wheels, which further enhance the portability of CAT 5510A. The wheels will allow you to move it around without the need to lift the whole unit. That allows you to even use it in areas where feetless compressors cannot stand. Also, the two wheels together with the back single rubber feet give the unit the stability it deserves so you can work anywhere.
Accompanying the compressor is one folio with keyboard and a micro USB charging cable. With the USB charging cable, you can be sure to recharge it when needed. The ability to recharge enables you to work anywhere provide there is electric connectivity. Also, for ease of use of this compressor, it comes with a user manual which you will find easy to follow. The unit comes backed by a limited one-year warranty.
If noise is a big deal, and you are looking for a high performing compressor, CAT 5510SE offers that and more.
- It is ultra quiet
- Oil-free pump for easy maintenance
- Wheels kit enhance stability
- Highly lightweight (46lbs)
- Does not drain water automatically
You will fall in love with CAT 6310 due to its quiet nature with only 60 decibels. That means there is no more working in a noisy environment. You will note that it is easy to talk comfortably with another person over this compressor without having to shout. Besides, you will no longer worry about working indoors which happens when using other noisy compressors that tend to become a nuisance to the neighbors.
The unit has a powerful 1HP motor operating at the peak of 2 HP. Also, the motor runs at a low of 1680 RPM which makes it less noisy and reduces wear. What’s more, this unit is powered by electricity. As such, it requires very minimal maintenance, unlike the oil-powered counterparts. Besides, you expect lowered or no expenses when maintaining.
Also, CAT 6310 has a specially engineered oil-free dual pump which enhances performance and while at the same time increasing durability. What’s more, you no longer need to think about maintenance. Besides, the design of the pump is in such a way that you can use it in any temperature and even in rough areas.
Featuring is a steel 6.3-gallon horizontal storage tank which increases the air carrying capacity. The tank has a steel material that makes it sturdy enough for a harsh work environment. It also has a water trap that helps to remove any excess water from the compressed air. The ability to trap water means that it will not need any kind of maintenance. The unit measures 49lbs which allowing you to transport it for use in different locations. CAT 6310 delivers 3.80 CFM at 40PSI and 2.35 CFM at 90PSI.
Also, below the tank are 2 wheels, which further enhance the portability of CAT 6310. The wheels will allow you to move it around without the need to lift the whole unit. Since the wheels render the compressor even less bulky, it makes it suitable for any user regardless of their body strength. Also, the two wheels together with the back single rubber feet give the unit the stability it deserves so you can work anywhere.
Together with the compressor is one folio with keyboard and a micro USB charging cable. Besides, this compressor is designed for use by all regardless of their levels of skills. As such, in the package is a user manual which you will find easy to follow. CAT 6310 comes with a limited one-year warranty, which gives assurance of the quality of this unit.
If noise is an issue, and you are looking for a high performing compressor, CAT 6310 offers that and more.
- Quite enough
- Little or no maintenance (oil-free pump)
- Wheels to enhance movement
- Highly lightweight (49lbs)
- May produce an odor given out as it works.
Bostitch presents a ultra-light air compressor. The compressor features a narrow tank diameter weighing 29lbs only. As such, you can carry it to any working station with ease. Besides, that lightweight allows you to store it without occupying much space.
What’s more, the 6-gallon tank operates at a maximum pressure of 150PSI. Also, it has a powerful motor that delivers 2.6 SCFM at 90 PSI. The compressor comes with a high flow regulator and couplers that offer you fantastic results.
Featuring too is an oil-free pump that does not require any maintenance meaning you will no longer need to waste much time or even money. However, note that the unit does not come with a hose. But that should not deter you from acquiring it as you can use any hose with a ¼ inch fitting. Moreover, you don’t have to worry about messing up yourself with oil as in occurs in the oil-powered counterparts.
Besides, if you are in an environment where noise is not entertained, then you have BTFP02012 compressor. With a maximum of 78.5 decibels, you can be sure to work in a relatively quiet environment where you will not disturb your neighbors either. However, for those seeking a very quiet processor, this might not be the best option. You should feel free to try out any other option on this list.
- Extremely light for portability
- Oil-free pump (no maintenance)
- Relatively quiet
- The compact design for storage
- Not very quiet
Make your nailing a breeze with the DWFP55126 air compressor. It has a pancake shaped storage tank that provides it with maximum stability. That means you can place it on the floor or in the car when transporting without worrying that it will tip over.
Featuring is a highly powerful motor which is easy to start even in the coldest weather. Besides, you don’t need to invest in any special equipment as it can work perfectly with the standard household cord. And don’t think about leaking charge because this will continue holding a charge for as long it is not in use. That means you can have it for outdoor usage.
It also has a 6.0-gallon storage tank that offers enough space for air storage and pressure. The compressor has a 165 PSI maximum pressure that allows it to store as much pressure in the tank for an extended duration of use. Besides, the air compressor delivers 2.6 SCFM when the rating on the gauge is 90PSI. That allows for a quick recovery meaning you don’t have to waste a lot of time waiting.
Expect your air tools to perform at optimal levels with the high flow regulators and couplers. That way you are guaranteed of professional job results. What’s more, there is no more worrying about lacking the necessary maintenance skills. Being oil-free, the pump does not require any kind of maintenance. Also, that feature not only gives the pump a long life but also saves you the little back you could incur on paying for maintenance.
DWFP55126 produces soft noise at 75.5 dBA which allows you to work in a conducive environment. Besides, the quiet nature of this compressor ensures that you don’t get into loggerheads with your neighbors for unnecessary noise even when working indoors. It also features a console cover that helps to protect the controls. Besides, since it is possible the machine might require some minor repair, the cover is removable for ease of access when repairing.
One unique feature about this unit is that it features two universal couplers which allow two users at a go. That capability improves job performance and speed with which you carry out your tasks. Ultimately, you are able to save time and money as you can carry out two tasks simultaneously. Also featuring is a ball drain valve that drains the water resulting from the compressed air from the tank quickly. Moreover, that eliminates the need to do regular maintenance like in their counterparts in the market that do not allow automatic drainage. Of importance to note is that you have to make sure that the drain is properly closed before use.
So as not to mess up with the floor, it has rubber-covered legs. The rubber also reduces the noise that may result when placing on the floor or when dragging along. Besides, it comes with a cord that you can wrap for compact storage and transportation. To add on to the transportation, it weighs 30lb only rendering it lightweight for maximum portability. Thus, you can use it anywhere you with little worries about you location.
- Pancake shape for stability
- A convenient and easy-to-start motor
- Lightweight for carrying and storage
- Lowered noise
- Quick charging and recovery time
- Highly priced but worth it
Makita is synonymous with its high-ended technology in the producing quality power tools and accessories. It presents another high-performing and silent air compressor. MAC2400 features a 2.5 HP 4-pole motor which needs oil to power. The motor produces 4.2 CFM at a 90PSI rating. It is powerful enough to support two nailers simultaneously. Featuring is a Makita cast iron pump with a Big Bore cylinder and a piston with a large opening and compression. That ensures that there is optimal compression, faster recovery and ultimately lowered noise. The cylinder has iron construction making it highly durable. That allows you to use it in harsh job environmental settings.
Moreover, notable on MAC2400 is a large pump lubricated with oil that runs at 1730RPM. That low speed is the reason behind the reduced noise and the pump durability. Air intake and efficiency are enhanced by a large filter designed like that of an automotive. Due to the efficiency resulting from the oil-lubricated pump, the compressor runs cool. Moreover, it runs at half the RPM of most compressor brands and with lesser noise at 79 decibels. The ability to run at a low RPM means that the motor will not spoil fast eliminating the need to incur money replacing the motor.
Featuring are 4.2-gallon twin storage tanks which support an operating pressure of 130 PSI. It delivers 4.8CFM at 40PSI and 4.2CFM at 90PSI that can sustain two nailers. The motor has a low amperage draw to reduce the possibility of tripped breakers. Besides, it helps to lower instantaneous voltage drop that would lead to the premature failure of the motor. The fact that voltage drop will be rare ensures there is no time the compressor will be down.
The protection of your machine is important so as to give it a long life. You don’t want to have unplanned budgets for things you can avoid. Your choice of compressor should have a security-related feature as a priority. Mac2400 bears a roll handle that plays two crucial roles. First, to comfortably handle and when transporting it to any place you want. Secondly, it provides additional protection allowing you to work in tough job environments.
There is no more manual draining of the as MAC2400 comes with a convenient oil drain for that purpose. Besides, at no given time will you be caught off-guard with an empty tank as it has a clear glass where you can keep track of the oil level. That also helps to make the maintenance easier.
Another feature worth noting is tank drain valve that is comparable to the standard automotive tank. Also, you have absolutely no reason to worry about the compressor getting hot upon an extended usage. Overheating here is a non-issue thanks to the finned discharge tubing that lets out the excess heat. When the pump is cool, it decreases the wear brought about by excessive heat.
Makita is extra vigilant before releasing any product for it consumers and MAC2400 has undergone extensive testing. Despite that, you will get a 1-year manufacturer’s warranty on MAC2400. If after 30 days you feel that it does not deliver as you expected, you are eligible for a full refund or even a replacement when a need arises.
As usual, MAC2400 is packed durability, noise reduction, durability and more importantly, performance in as a single package.
- Robust cast iron and oil-lubricated pump cylinder
- One year warranty
- Finned tubing for excess heat dissipation
- Tank drain valve allows for ease of maintenance
- May be relatively heavy but still portable
Senco has maintained a clean reputation in the manufacture of power products for over 60 years and counting. Everybody likes improved performance and excellent results and that what their products achieve. It doesn’t matter whether you are a professional or DIYer; your trimming, finish, and more work just got easier with Senco PC1010 Compressor. And don’t forget that this compressor is has a compact portable style rendering it lightweight. It weighs only 20 pounds, a feature that makes it easy to carry from one workstation to another. Also, that feature makes it an excellent choice for small and medium type jobs.
What’s more, this is not the type that produces that annoying noise when working. It is ultra-quiet such that you will forget it is even in use. As a result, you can use it for both the indoor and outdoor projects. And when we mean quiet, we mean it. If you decide to have your in-house projects, there you won’t have a hard time with your neighbors. It is so silent that it is not enough to wake up a sleeping baby.
Featuring is a direct drive motor and pump for added efficiency on your job. Besides, being an air compressor, there is no more worrying about messing yourself with oil as happens with other compressors. In a similar vein, you won’t face disposal issues associated with oil powered compressors. What’s more, you can use it indoors without disbursing oil in the air which makes it simple to dust it upon each usage. For maximum durability, PC1010 has an aluminum cylinder. The strong construction material not only renders it sturdy but also allows you to work in any environment with the peace of mind.
Sensco PC1010 features a storage tank with a capacity of 1 gallon. It has motor at1 horsepower peak and ½ horsepower running. The motor produces 20-44 drives per minute.
Time is money, and PC1010 put you as a user into consideration. There is no more lingering around waiting to power your compressor so you can embark on your job. It only requires you to be patient for a just 128 seconds or less to pump and a recovering period of 35 seconds to recover. With that kind of speed, you are assured that at no given time will you experience a downtime. So there is no way you will waste that crucial time you could use in doing your job.
You will find air compressors with metallic feet which may scratch the floor when dragging or even placing down. That is not the case with PC1010. You can comfortably use it for any in-house projects without worrying of incurring losses resulting from damage from the feet. The feet are covered with a rubber material that ensures that the floor in your working environment particularly those made of hardwood do not wear out. Besides, that feature helps to boost the low noise element.
You have no cause to be concerned about the quality of the air compressor as the manufacturer backs it with a one-year warranty.
- Highly lightweight for transportation
- Ultra-silent even on indoor usage
- Fast recharge and recovery
- Aluminum cylinder renders highly durable
- Has no air filter for clean air
Makita is reputed for its cutting edge technology in the manufacture of quality power tools and accessories. It presents another high-performing, and silent air compressor MAC700 features a 2.0 HP motor and is powered by oil. Featuring is a Makita Big Bore engineered pump cylinder with a large opening and compression. That allows for optimal compression, faster recovery, and less noise. The cylinder has iron construction making it highly durable to allow usage in almost all environments.
Also, notable on MAC700 is a large 1720 RPM pump lubricated with oil. Air intake and efficiency are enhanced by a large filter designed like that of an automotive. Due to the efficiency resulting from the oil-lubricated pump, the compressor runs cool. Moreover, it runs at half the RPM of most compressor brands and with lesser noise. The ability to operate at a low RPM means that the motor will not spoil fast eliminating the need to incur money replacing the motor.
Featuring is a 2.6-gallon storage tank which supports an operating pressure of 130 PSI. It delivers 3.8CFM at 40PSI and 3.3CFM at 90PSI. The motor has a low amperage draw to reduce the possibility of tripped breakers. Besides, it helps to lower instantaneous voltage drop that would lead to the premature failure of the motor. The fact that voltage drop will be rare ensures there is no time the compressor will be down.
Another feature worth noting is a roll handle that plays two major roles. First, to comfortably handle it and when transporting it to any place you want. Secondly, it provides additional protection allowing you to work in any environment.
You don’t need to drain the oil manually as it comes with a convenient oil drain for that purpose. Besides, at no given time will you be caught off-guard with an empty tank as it has a clear glass where you can keep track of the oil level. Also, for ease of maintenance, it has a tank drain valve that is comparable to the standard tank. You are dead wrong if you thought this compressor would get hot upon prolonged usage.
Here, overheating problems are no-no thanks to the finned discharge tubing that lets out the excess heat. When the pump is cool, it decreases the wear brought about by excessive heat.
If there is a company that is careful before releasing product, it is Makita. Despite that, you will get a 1-year manufacturer’s warranty on MAC700. That way you can get a full refund or even a replacement with another compressor when the need arises.
With MAC700, you are assured of reliability, convenience, durability and more importantly, performance.
- Cast iron and oil-lubricated pump (durable)
- Low displacement RPM
- One year warranty
- Finned tubing for dissipation of excess heat
- Tank drain valve allows for ease of maintenance
- Not too lightweight
The best selling air-compressor on Amazon is the oil-free Porter-Cable. Several features make Porter Cable stand out from the pack. Stability is a fundamental element in all equipment, and Porter-Cable is not left behind on that front. It has a pancake style tank that renders it highly stable guaranteeing you the peace of mind when working. With the rubber feet, you can be sure there can be no damage to the floor in case you happen to drag it.
Also featuring on the tank is a water drain valve that drains the water resulting from the air compressed in the storage tank. You need little to no maintenance since it comes with an oil-free pump. That being the case, even if you are not an expert, you can comfortable use Porter- Cable. Besides, the feature makes it environmentally-friendly.
Featuring is an induction motor that offers high performance while at the same time allowing you to use it for an extended duration. As such, you are assured of a working air compressor whether the task requires a high CFM or not. What’s more, the air compressor is not complete without a low amperage 120V motor that is easy to start even in cold weathers or using the extension cord.
There is absolutely no need a special source of power it can work with a standard household circuitry. And it won’t take you an eternity to recharge the 6-gallon tank since the motor can run at 3.5 SCFM. Besides, for a quick recovery, the unit can produce 2.5 SCFM at 90PSI rating which is in compliance with ISO1227.
Besides, the motor has replaceable brushes that ensure your motor has a long lifespan. Also, the 6-gallon tank allows it to operate at a maximum pressure of 150 PSI. That also helps to as much air in the tank so you can use for an extended duration. You will benefit a 30PSI ‘bonus air’ which results from including a 120 PSI cut-in pressure. Besides, it has a High-Flow mechanism that ensures that the pressure does not fall too low.
You have no reason to worry about leakages that result from installing very sensitive components of an air compressor. That is because the air coupler and the plug come installed for you right from the factory. Don’t forget that it has a pressure regulator on the pressure gauge that allows you to adjust the rating from 30PSI to 40PSI for instance.
Featuring too is a handle so you can carry it to whichever place you would like. The covering also makes it easy to protect the vital components from damage. Also, accompanying Porter-Cable is a 13-piece accessory kit. The items in the kit include a 25-foot nylon hose long enough for all applications. There is an air blow gun and attachments, plugs, tire gauge and more.
You will note that the user instructions do not touch on the need to break-in before use. Well, it might not be a requirement with this compressor. However, we think it is a good practice necessary to break-in to ensure that your air compressor works at full potential. Besides, it won’t cost you anything by doing it. It would be a huge loss if your machine fails for lack of it.
Backed with one year warranty on each of the accompanying accessories, you can be sure it is a quality unit. And since you have an interest in air compressors, bless yourself with Portable–Cable compressor and you can be sure you will find it very handy.
- Pancake styled storage tank for stability
- Drain valve eliminates excess water
- Oil oil-free pump cylinder
- Come with a 3-piece accessory kit
- Air coupler and plug already installed
- Needs break-in to prevent motor damage
Move with the technology in your way of doing things. Days of straining when manually carrying out various tasks are over. Relieve yourself the after work stress and fatigue by securing an air compressor. It is our hope that we have provided all the details needed to help you make your decision with ease. Take your time to analyze every review, and it is our hope you will find it worthwhile. After that, select the one you think will give you the best results and boost your performance.