Best Brake Controller of 2019 | Buying Guide

Best Brake Controller

Brakes were designed to control or stop a set of wheels. This gets complicated when there are more than those do. When towing another car, a trailer, or moving more than one vehicular body (like a train), you are in danger just as much as your vehicle is. However, you can avert this risk by using the best Brake controller. While Trailer Brakes can give you an extra protection, they cannot operate without the help of a Brake controller.

Brake controllers are OEM devices installed on the tow driver’s side dashboard. It works on the electrical braking system of the trailer, which can be time delayed or proportional when it is decelerating or halting.

5Hopkins 47284 Reliance Digital Electronic Brake Control with Plug-In Connector

Best Brake Controller of 2019 | Buying Guide41E4YIbDQpL-1

This Brake controller has control features that are easy to use without losing concentration on the road. The Hopkins 47284 Reliance Digital Electronic Brake Control with Plug-In Connector is very reliable and improves towing experience simple. These are some reasons why it ranks as one of the best Brake controllers in the market.

Features

This is a time based intuitive Brake controller with a vertical manual slide, which corresponds to the way a driver, reaches for the control. It works only on any 12V negative ground system and you can mount it at any angle.

Its Plug-in Simple connection allows you to quickly install or remove the controller without splicing or cutting. It is short circuit protected and can operate up to four Brake systems. A LED digital display with full digital settings shows the percentage of braking power.

Pros

  •  It is easy to install and mount.
  •  It is compact and needs no leveling.
  •  Its indicator shows any problem.

Buy From Amazon

4Reese Towpower 8507111 Brakeman IV Compact Brake Control

Best Brake Controller of 2019 | Buying Guide41OIAKuCcnL

This is a time-delayed Brake controller, which can mount on the trailer without leveling. The Reese Towpower 8507111 Brakeman IV Compact Brake Control is efficient as Brake controllers come and features some good qualities that rank it as one of the best Brake controllers around.

Features

This Brake controller has a small compact design, which can mount easily in any direction without needing leveling. It operates with a 12V negative ground voltage system and provides up to eight braking with an internal circuit protection. Its digital display shows updates of the Brake overload, synchronization settings, output settings and short connections.

The Reese Towpower 8507111 Brakeman IV Compact Brake Control also features a microprocessor that enables you to read the data on the display well even when you mount the controller is upside down. It also has a Plug-N-Play feature for easy and quick connection.

Pros

  • It is easy to install.
  • There are a variety of mounting options, which do not compromise its performance.
  • It has protection against ground loss and short circuits.

Buy From Amazon

3Draw-Tite 20191 I-Stop IQ Electronic Brake Control

Best Brake Controller of 2019 | Buying Guide51p3NuydXdL

The Draw-Tite 20191 I-Stop IQ Electronic Brake Control is a proportional Brake controller suited for trailers having one to three axles. This Brake controller has many customer reviews and it is widely recommended.

Features

The automation on this product ensures the trailer Brakes work in harmony with the towing vehicle Brakes. An option for applying boost function, which increases the braking, is available if needed. It is self-leveling; you therefore do not require any level adjustment. A self-regulation feature on the controller will automatically report and show the problem on a digital LED display.

For those who tow occasionally, a snap-in mounting clip allows you to remove the controller and store. It also features a Plug-N-Play port, which accommodates 2-plug adapters. You do not have to worry about a thing because its self-diagnostic feature will alert you in advance via the LED display anytime a problem arises.

Pros

  • It can work perfectly for a range of axle of one to three.
  • It is easy to install and remove.
  • It is reliable and very effective
  • The self-diagnostic feature allows you to worry over nothing.

Buy From Amazon

2Tekonsha 90885 Prodigy P2 Electronic Brake Control

Best Brake Controller of 2019 | Buying Guide41mP2BX2jchL

The Tekonsha 90885 Prodigy P2 Electronic Brake Control is another state of the art performance Brake controller that occupies the second spot our list. It is a fully automatic Brake controller, which applies the brakes to the trailer at the same rate as the tow vehicle.

Features

This is one of the best Brake controllers with a self-adjusting feature according to the terrain and switches off when it is not in use. It also gives the driver an option of manual braking when towing a heavier load through its boost feature. A digital display shows voltage delivered to the trailer during braking with a continual diagnostic check on a secure connection, magnet conditions and reverse battery protection.

It offers various mounting options including a vertical 360° rotation. A disconnect feature on this mount allows you to remove and store the controller when not in use. This electric Brake controller can take as much as four axles with an electric over hydraulic Brake mechanism.

Pros

  • Its boost feature allows more braking power.
  • The Brake controller can adjust according to the terrain.
  • It switches off when it is not in use.
  • A continuous diagnostic feature allows you to monitor the Brake controller always.

Buy From Amazon

1Tekonsha 90195 P3 Electronic Brake Control

Best Brake Controller of 2019 | Buying Guide41gdjHN3MKL

This takes the top spot in our list of the best Brake controllers because of its functionality and effectiveness. The Tekonsha 90195 P3 Electronic Brake Control is highly recommended by drivers and promises impeccable quality.

Features

This Brake controller has a customized braking that features boost, electric and electric over hydraulic operations with an in-depth system self-diagnostics while driving. On the well-lit LCD display are the status reports of the Brakes in one of three languages.

It has a P3 electronic braking system control that offers proportional braking to four-axle trailers. Its display shows diagnostics of battery, output current and voltage, Brake and warning system alerts. It has an integrated Plug-N-Play port, which accommodates two plug adapters with a snap-in mounting clip for control removal and storage.

Pros

  • Its Plug-N-Play port makes it easy for adaptability
  • You are always ahead with its Self-diagnostic feature to keep you informed.
  • It is unique and straightforward to use and understand.
  • It supplies more power to the Brakes.
  • The boost feature allows different levels of customized braking.

Buy From Amazon

Tips To Consider When Purchasing the Best Brake Controller

Having the right amount of money is not enough in getting you the best Brake controllers if you do not have adequate information about them. Choosing the best among these Brake controllers may not be as easy as it seems because they vary in features and specifications. Below are some useful tips to help you make the right decision.

Voltage

Most Brake controllers work for 12V vehicles although there are 24V types in the market. Make sure any brake controller you buy tallies with the power source of your towing vehicle.

Display type

The best Brake controllers feature the best LED or LCD type of displays for showing information. These displays are well lit, properly arranged and very visible thus making them easy to understand.

Mounting

How easy you can mount a Brake controller also matters. The best Brake controllers are easy to mount and unmount making storage easier. A Plug-N-Play feature ensures you do not have a difficult time setting this module on a trailer’s dashboard.

Proportional or Time delayed type

Proportional Brake controllers use a proportional power to operate the Brakes after sensing the vehicle’s deceleration using a different system. Time delayed Brake controllers apply a particular amount of power to the Brake at any given time.

Number of axles

The number of axles on a Brake system is the measure of the amount of power it can deliver. A four-axle Brake controller is ideal for use on a triple, tandem and single axle trailers.

Conclusion

When it comes to vehicles, you need all the safety you can get. This product type featured in all the products reviewed below is as important as it gets depending on the vehicular weight you are moving. Stay safe!

Additional Buying Guides

You may also be interested in our LED Light Bar Guide, Screwdriver Set Guide, Tire Chains Guide, Wheel Cleaner Guide, Wheelbarrows Guide and Jump Starters Guide.

Leave A Comment

Your email address will not be published. Required fields are marked *